|
Product Details:
Payment & Shipping Terms:
|
| Keyword: | Paint Thinner On Car | Model: | FPC-135 |
|---|---|---|---|
| Usage: | Building Coating, Car Paint, Plastic Coating, | Main Raw Material: | POLYURETHANE |
| Selling Units: | Cans | Shelf Life: | 2years Of Unopened Tank In Cool & Dry Place At Normal Temperature |
| Highlight: | 1L/Can Lacquer Thinner Car Paint,polyurethane Lacquer Thinner Car Paint,1L/Can Water Based Car Paint Thinner |
||
High quality thinner, specially designed for primer, basecoat and topcoat, Available with fast, standard, slow and extra slow drying speed to match different products and different application .Reducing viscosity,helping leveling and faciliate the constraction requirements.
| Item | Datas |
| Color | Transparent |
| Mixture rate | 2:1:0.3 |
| Spraying coating | 2-3 layers,40-60um |
| Interval of time(20°) | 5-10 minutes |
| Drying time | Surface dry 45 minutes, polished 15 hours. |
| Available time (20°) | 2-4 hours |
| Spraying and applying tool | Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
| Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² | |
| Theory quantity of paint | 2-3 layers about 3-5㎡/L |
| Storage life | Store for more than two years keep in original container. |
. Enables efficient rapid repairs
. Reduces paint defects
. Flexibility of drying equipment
. Efficient material usage
1, It applies to thoroughly ground and cleaned intermediate paints, original paint or intact 2K paint surface. And soft based materials with an insulating layer.
2, It can be used for partial spraying of new cars or repairing of old cars.
Old paint film that has been hardened and polished, the surface should be dry and free of impurities such as grease.
1.Spray as far as possible, special cases can be brush coating;
2.The paint must be evenly mixed during construction,and the paint should be diluted with a special solvent to the viscosity required for construction.
3.During construction,the surface should be dry and cleaned of dust.
4.Spray 2-3 layers, can be polishing after 15 hours.
1.Base temperature is not less than 5°C,the relative humidity of 85% (temperature and relative humidity should be measured near the base material),fog, rain , snow, wind and rain is strictly prohibited construction.
2.Before painting the paint, clean the coated surface to avoid impurities and oil.
3.The product can be sprayed, it is recommended to spray with special equipment. The nozzle diameter is 1.2-1.5mm,the film thickness is 40-60um.
Paint:1L
Q1, Are you manufacturer or trading factory?
A: In fact we are the factory more then 10 years, can supply all types of paint.
Q2, If the OEM is accepted?
A: Yes, OEM is welcome. We also can do your own logo and package.
Q3, If I do not know which paint to choose, what shall I do?
A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.
Q4, What’s are your payment term?
A: We can accept the TT, Western Union, LC, Credit card, and Alipay, and others please contact with us freely.
Q5, Can you accept to supply the free sample?
A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.
Q6, Do you have more ways to contact with you?
A: Yes, you can contact with us by mobile/wechat/whatsapp:0086 185 3817 3191.
Q7, Can we visit your factory?
You are Warmly welcomed to visit our factory, it would be our great pleasure.
Contact Person: Ms. Anna
Tel: +86 185 3817 3191
Fax: 86-371-63379986
